Skip to main content

Automatic Door and Hardware

Search This Blog

Norton motor gearbox p/n 6010LAP

on January 24, 2019

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

Comments

UnknownFebruary 3, 2021 at 12:48 PM
How do you test the motor
ReplyDelete
Replies

Post a Comment

Popular Posts

How To Remove Handicap Push Button - The Quick Way

Handicap Activation Switches Today handicap door openers or low energy door operators can be found everywhere due to the Americans With Disabilities Act, or ADA. A low energy door operator uses 2 knowing act devices to activate the door operator. These knowing act devices are typically wireless handicap push buttons. Knowing act refers to the idea that pedestrians activate the door with the intent of opening the door. This is different than an automatic door sensor, which activates based on motion. With a sensor it is possible pedestrians may activate the door without the intent. The handicap push buttons used have a stainless steel faceplate with the wheelchair symbol and the words "push to open." With so many handicap buttons in buildings everywhere, it is only a matter of time before you need to open the handicap push button to replace the battery or replace the switch altogether. In this article we explain how to take apart the handicap push button the easy and fast

Handicap Door Opener Not Working...10 Things To Check

If you are a building owner, chances are you own a building with atleast one handicap door opener. Handicap door openers, or auto door openers, are a great asset to any building, as they provide automatic access for the elderly, people with disabilities, and more. Each day we take for granted the ease of opening the door due to the precision automation of the handicap door opener. However, as soon as it stops working, we notice very quickly. Here are 10 things to check if your handicap door opener has stopped working. 1. Check That The Power Is On On every handicap door opener there is an On/Off power switch typically mounted on the side of the door operator header box. Some door openers feature and On/Off/Hold Open switch. Check to confirm that the power switch is in the On position. If the door is stuck open, make sure it is not in the "hold open" switch position. Although this seems simple, you would be surprised at how many times a teenager or young adul

Stanley MC521 Pro Fixes That Actually Work!

Stanley MC521 Pro Controller It can be frustrating when your automatic door is not operating properly. In this article we go over some tricks of the trade for the popular Stanley MC521 Pro that actually work. The Stanley MC521 Pro Control is the latest revision of the automatic door control unit for the commercial Stanley Duraglide Automatic Sliding Doors as well as the Magic Force Handicap Door Openers. Fix #1 Pro Beams/Self Contained If you install your Stanley MC521 Pro and the door does not close, then this is most likely your culprit. The default setting for hold open beam types on the Stanley MC521 Pro is for Stanley Pro Beams or Self-contained beams, however most Stanley automatic doors actually have Optex hold open beams. Index 20 on the controller software is the hold open beam type category. Value 01 is the pro beams option. You want to change the value to 00 Optex hold open beams. Once you do this and exit out of the programming, the doors should close. If not, the

Powered by Blogger

Automatic Door and Hardware